|
|
||
|
Meridian 501 Control Unit The 501 Control Unit is a high-quality full-function analogue preamplifier for use with any traditional high-performance audio system. Often found alongside the Meridian 556 power amplifier, 501 provides a flexible front end for a superb sounding two-channel system. |
Product/501 Control Unit
|
|
|
|
The 501 Control Unit combines major advances in audio and engineering design. It is a high quality full-function preamplifier for use with high performance analogue sources. It provides six audio inputs, each of which can be individually adjusted for sensitivity, and identified on the four-character alphanumeric display. A high quality MC or MM phono stage is available as an option for the dedicated LP input. |
Six analogue inputs with adjustable sensitivity Two main variable outputs Tape output Low-distortion electronic volume control with 99 one-dB steps RS232 for computer control
|
|
Technical Specification Distortion: Less than 0.01% input to output. Signal/Noise: Less than –90dB for high-level analogue inputs. Less than –70dB for MM input. Less than –60dB for MC input. MM option: Sensitivity adjustable 0.5–3mV for 5cm/s @ 1kHz. Overload point 47mV @ 1kHz. Cartridge load 47k ohms + 100 pF. MC option: Sensitivity adjustable 38–210µV for 5cm/s @ 1kHz. Cartridge load 220 ohms + 10nF. Inputs: 6 unbalanced on phono, 27–150mV (impedance 20k ohms). Outputs: 2 unbalanced on phono, 1.4–3Vrms maximum. Tape output: Unbalanced, 1.5V Headphone: 2V maximum output Comms: Two 5-pin 240° DIN sockets, RS232 interface. Construction: Black textured enamel and glass finish. Dimensions: 88mm (3.46in) H, 321 (12.64) W, 332 (13.07) D Weight 5kg (10lbs) Controls: Front-panel controls for Source, Copy, Mute, Display, Volume up/down, Off. Full remote control of all features via MSR Front Display: 4-character dot-matrix LED display |
Use 501 with: MSR Remote
|
|
|
| News | Dealers | Products | Library | Gallery | Contact |Search | Home | |
© 2003 Meridian Audio |
|
