Outline Technical Specification

Performance

• Frequency response in-room within 3dB from 35Hz to over 20kHz. Linear-phase mid/top crossover. Output >108dB spl @ 1m on music material. Noise less than 15dB spl. Overall distortion typically <0.02% at any frequency or level.

Inputs

• Meridian SpeakerLink in and out (RJ45)
• S/PDIF digital input, 32kHz–96kHz sampling rates at up to 24 bit with MHR support (phono).

Construction

• ‘2 1/2-way’ acoustic reflex system. Single-port (vertical model) or dual-port (horizontal centre).

Drivers

• 2 x 160mm polypropylene bass drivers.
• 1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded.

Electronics

• Two precision 24/192 oversampling converters for bass/mid and tweeter signals. Active bass/mid crossover. Digital and conversion electronics constructed using advanced surface-mount techniques and partitioned 6-layer printed-circuit boards.

DSP

• 150MIPS digital signal processor. Digital crossover at 2.6kHz. Response correction for the whole system. Bass protection. User tone controls. Analogue/digital volume and phase control.

Amplifiers

• Three 75W power amplifiers, one for each driver.

Display

• Eight-character display with system lights, can be blanked.

Dimensions

• Vertical model: height: 903mm (without spikes/feet); width: 300mm at base, tapering to 179mm; depth: 356mm at base, tapering to 217mm.
• Horizontal centre model: height 200mm;  width 734mm; depth: 265.75mm at deepest point.

Weight

• 35kg packed.

All specifications are subject to change without warning. Installers should check measurements against an actual unit. E&OE.