Welcome to the support page for
808V6 Signature Reference CD Player
Here you will find all of the information that you require to get the most out of your 808V6 Signature Reference CD Player.
If you cannot find what you are looking for then please use the search facility above.
No. All analogue signals are converted to the digital domain on the input card. This is done using high-quality A/D conversion running at 96kHz sampling rate and 24 bit precision.
These can receive up to 192kHz.
This can receive up to 192kHz.
The 808V6 can perform the role of a pre-amplifier superbly. It can provide source selection and volume control when used between sources and power amplification. Its incredible sound quality means that it is suitable for use with products of even the highest performance.
The 808V6 can act as a very high performance DAC, accepting digital signals on its inputs, converting them to the analogue domain and passing the audio on to the next component in the audio chain. However, as the 808V6 can perform the duties of source selection and volume control, if the next component is a pre-amplifier product, such a set-up would add unnecessary duplication with associated and unavoidable sonic degradation. A purer path would be provided by connecting the 808V6 directly to the amplification and allowing it to perform the role of control unit as well as DAC.
This socket allows the 808V6 to be connected to an Ethernet network so it can be used as an audio end-point in a Meridian Sooloos or Roon streaming system.
The 808V6 is fitted with the ID41 Sooloos card. This has the capability of providing exceptional sound quality from Sooloos or Roon. It can out-perform any stand-alone Sooloos source product in this regard
Not necessarily. All the key features of the 808V6 are available through the front-panel set-up. The Meridian set-up program, MConfig, allows the settings of the 808V6 to be further personalised and for a back-up of the settings to be created.
Yes, but this requires the use of the Meridian set-up program, MConfig. The legends are limited to a maximum of five characters.
The 808V6 includes the ID41 audio end-point for a Sooloos system. However, another device is required on the network to host the Sooloos software. Within Sooloos terminology, the host is known as the “Core” of the system. The 808V6 is not designed to perform this task as it involves the use of additional computer circuitry which, if included inside the product itself, would be detrimental to audio performance. A selection of Meridian products can act as Core as can certain models of QNAP NAS when loaded with the appropriate Sooloos software “plug-in”.
Most QNAP devices which are based on Intel processors can run the Sooloos software plug-in. If a two-bay unit is required, we recommend the TS251 models. If a four-way device is required, we recommend the TS451 models. If a rack-mountable solution is required, the TS453U can be used.
The Meridian program Control Window can be used to check whether the 808V6 is receiving and transmitting data over RS232. This program runs on a PC and acts as a pre-configured terminal to check communications to and from the 808V6.
Emphasis is a feature of SPDIF rather than file formats such as FLAC. The presence or otherwise of Emphasis is not actually flagged in a ripped file so there is no mechanism for the product to detect it. In order to guarantee correct playback quality of Emphasized discs the De-Emphasis process should be carried out before or during the process of importing the file into Sooloos or Roon. The indicator for Emphasis on the 818 relates to the playback of digital audio from the CD drive or other SPDIF source.
The 808V6 supports “MHR” (Meridian High Resolution) on its digital outputs. This provides improved performance compared to standard SPDIF digital audio. However, MHR is a proprietary interface available only on Meridian products. When MHR is decoded by a non-Meridian product, it results in the noise described in the question. MHR can be toggled on and off by holding down the fast-forward (►►) key under the front flap of the product for a few seconds while the unit is in Standby. With MHR deactivated, standard audio will be produced from the digital outputs.
Yes. MHR can be toggled on and off by holding down the fast-forward ( ►►) key under the front flap of the product for a few seconds while the unit is in Standby. With MHR deactivated, standard audio will be produced from the digital outputs.
- MAC USB Setup Instructions.pdf
- MConfig software suite installer.zip
- MConfig user-guide.pdf
- Sooloos AMX Module v2.1 (with Instructions).zip
- Sooloos Control4 Driver (with Instructions).zip
- Sooloos ControlMac (Sooloos Core required).zip
- Sooloos ControlPC (Sooloos Core required).zip
- Sooloos Crestron Module v2.6.zip
- Sooloos for QNAP NAS.zip
- Sooloos TouchPC.exe
- virtualMSR for Meridian.pdf
- Windows USB driver with instructions.zip