Special Edition DSP5200 Digital Active Loudspeaker

The Special Edition DSP5200 builds upon the DSP5200.2, delivering ultimate high-resolution performance from a compact loudspeaker.

Its beryllium tweeter and wideband analogue electronics extend frequency response to over 32kHz. Clamp rings minimise resonance from the drive units and solid aluminium feet provide enhanced stability. 

The additional DSP device used by the Special Edition loudspeakers doubles the available processing power allowing all audio, including MQA Core streams, to be rendered at 176.4/192kHz regardless of the incoming sampling rate. This results in increased resolution, detail and clarity to provide maximum fidelity from movie soundtracks as well as music.

 

Key Features

Outstanding performance. Three powerful wide range 75W amplifiers deliver a maximum output level of 116dB at 1m.

Light weight, dual voice coil, Beryllium tweeter for refined high frequency performance (up to 32kHz).

Clamp rings ensure that the bass and midrange drivers are isolated from the cabinet, giving the most controlled and detailed sound possible.

New extended-bandwidth analogue electronics, optimised to deliver maximum performance from high-resolution recordings.

We are the masters of Digital Signal Processing

With its extensive Research and Development programme Meridian has pioneered the development of a host of innovative audio technologies many of which feature in today’s Meridian products.

As pioneers and leaders in the field of Digital Signal Processing (DSP) technology, Meridian is able to deliver your music authentically to recreate the passion and involvement of your musical moments. Power-efficient, active DSP crossovers are individually tailored to distribute music to each speaker, bringing your music to life.

The traditional setup – amplifiers driving passive loudspeakers – is inefficient, limiting sound quality. Meridian loudspeakers contain a complete, matched audio system with efficient DSP crossovers, multiple DACs and driver-specific amplifiers, giving higher overall quality, less power use, and the performance of a traditional loudspeaker eight times the physical volume.

Traditional audio systems often require large, expensive cables to maintain their performance. Meridian's SpeakerLink uses an “Ethernet style” cable that delivers pristine digital sound and control down a single cable between Meridian components. The result is simple, unobtrusive, and cost-effective cables that are easy to install

Each sample of a digital recording must remain evenly spaced in time. Unfortunately, timing can vary, especially when reading discs. This is “jitter”, degrading music's sense of space and diminishing realism. Meridian's multiple “First In, First Out” buffering system minimises jitter, ensuring perfect timing and improved clarity. You enjoy a clearer feeling of the instruments and their interrelationship.

Filters are critical in digital audio. Commonly they introduce distortion and harshness because of "pre-ringing". Early digital recordings suffer from harshness too, due to primitive filters. After painstaking research, Meridian developed a special filter that avoids pre-ringing, so it can be steeper, cleaning up the effects of early filters. The result: a better, cleaner sound from recordings old and new.

High or low, all sounds travel at the same speed, so all the sounds from a live musical event arrive at your ear at the same time, whatever frequencies they contain. Loudspeakers, however, have a problem when playing low frequency sounds at the same time as mid and high frequencies – the bass arrives late, and the deeper the sound, the later it arrives. This delayed bass causes music to lose its impact and reduces the sense of the recorded space – it is often described as “boomy”.

The goal is to have time-accurate loudspeakers, where all reproduced frequencies start and end at the same time. In a loudspeaker, this timing is affected by the crossover, driver, and enclosure 
type. To eliminate the delay between low, and mid and high frequencies, Meridian has designed a combination of digital filters and time delays for the mid and high frequencies. This solution enables the mid and high frequencies to “wait” for the low frequencies, delivering perfectly-timed music playback.

Mid and high frequencies are delayed to time-align them, while upper bass is delayed with a special type of patented filter. These features must 
be implemented entirely in the digital domain, making them impossible to achieve in any passive or analogue-active loudspeaker design.

Enhanced Bass Alignment provides accurate time-alignment of the drivers in the system, delivering exceptional imaging and a clear, transparent, more life like sound.

Watch our film about EBA

WE ARE THE PIONEERS OF HI-RES AUDIO

MQA is a technology that captures the full magic of an original studio performance. Using pioneering scientific research into how people hear, MQA delivers master quality audio in a file that’s small enough to stream or download – the days of sacrificing quality for convenience are over. Visit mqa.co.uk for more information.

Uses a complex digital filter to double the rate of samples from the source to improve resolution of the finer details in the record. This means that even with a standard source such as CD using our upsampling technology we are able to significantly enhance the listening experience.

A patented Meridian audio format that combines high bandwidth, security and low jitter. MHR gets the highest possible sound quality in playback systems that use Meridian and enables the encoded transmission of PCM, MQA and DSD.

The Special Edition Loudspeakers

Meridian’s goal has always been to reproduce the sound of the original performance exactly, and let nothing else get in the way.

AUDIO INPUTS

Meridian SpeakerLink (RJ45) & RCA phono digital inputs accepting 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support

AUDIO OUTPUTS

Meridian SpeakerLink (RJ45) & RCA phono digital outputs delivering 32kHz to 96kHz sampling rates at up to 24-bit, with MHR support

PERFORMANCE

Peak SPL: 116dB at 1m

Noise less than 15dB SPL

Frequency response in-room within 3dB: 35Hz to over 32kHz

AMPLIFIERS

3 x 75W (225W)

Overall distortion typically <0.02% at any frequency or level

LOW-BASS DRIVER

160mm polypropylene long-throw

MID/BASS DRIVER

160mm polypropylene long-throw

BERYLLIUM DOME TWEETER

25mm (1”) Meridian piston in short-horn, beryllium dome with silver voice-coil.

DSP FEATURES

2 x Freescale 56367 running at 150MHz

FIFO memory buffer input for the lowest possible jitter from almost any source

Crossover minimum-phase at 2.6kHz

Bass protection

Response correction for the whole loudspeaker

Hybrid analogue/digital volume control

Balance control with proportional delay compensation

DISPLAY

Eight-character display with additional status indicators; can be blanked during use 

DIMENSIONS / WEIGHT

HEIGHT: 903mm [36in] (Without feet/spikes)

WIDTH: 178mm [7in] tapering to 300mm [11.8in]

DEPTH: 220mm [8.7in] tapering to 360mm [14.2in]

FOOTPRINT (W x D): 300mm [11.8in] x 360mm [14.2in]

WEIGHT: 35kg [77.1lbs]

POWER

20VA standby: 600VA max

Find Your Nearest
MERIDIAN DEALER

You can’t fully appreciate Meridian until you experience our products for yourself.

YOU MAY ALSO BE INTERESTED IN