Special Edition DSP7200 Digital Active Loudspeaker
The Special Edition DSP7200 demonstrates the ultimate expression of high-resolution audio that can be achieved within a loudspeaker of its size.
The DSP7200SE’s additional DSP processor and drive-unit clamp rings, combined with extreme cabinet resonance control, guarantee the listener hears the finest details. Its beryllium tweeter delivers breathtaking clarity and detail that can be enjoyed effortlessly for long periods of time. This optimum fidelity is supported by punch and control, making the DSP7200SE the perfect solution for authentic audio in small to medium sized rooms (20-50m2).
The additional DSP device, used by the Special Edition loudspeakers, doubles the available processing power allowing all audio, including MQA Core streams, to be rendered at 176.4/192kHz regardless of the incoming sampling rate. This results in increased resolution, detail and clarity to provide maximum fidelity from music and movies.
Outstanding performance. Four powerful wide range 150W amplifiers deliver a maximum output level of 118dB at 1m.
Light weight, dual voice coil, Beryllium tweeter for refined high frequency performance (up to 32kHz).
Clamp rings ensure that the bass and midrange drivers are isolated from the cabinet, giving the most controlled and detailed sound possible.
New extended-bandwidth analogue electronics, optimised to deliver maximum performance from high-resolution recordings.
We are the masters of Digital Signal Processing
With its extensive Research and Development programme Meridian has pioneered the development of a host of innovative audio technologies many of which feature in today’s Meridian products.
As pioneers and leaders in the field of Digital Signal Processing (DSP) technology, Meridian is able to deliver your music authentically to recreate the passion and involvement of your musical moments. Power-efficient, active DSP crossovers are individually tailored to distribute music to each speaker, bringing your music to life.
The traditional setup – amplifiers driving passive loudspeakers – is inefficient, limiting sound quality. Meridian loudspeakers contain a complete, matched audio system with efficient DSP crossovers, multiple DACs and driver-specific amplifiers, giving higher overall quality, less power use, and the performance of a traditional loudspeaker eight times the physical volume.
Loudspeaker enclosures often vibrate, colouring the sound, making it less lifelike. Our most advanced loudspeakers use a cabinet construction material unique to Meridian: Meridium features highest-grade laminated plywood layers bonded to an aluminium core, allowing the loudspeaker to reproduce music accurately without adding its own sound.
Each sample of a digital recording must remain evenly spaced in time. Unfortunately, timing can vary, especially when reading discs. This is “jitter”, degrading music's sense of space and diminishing realism. Meridian's multiple “First In, First Out” buffering system minimises jitter, ensuring perfect timing and improved clarity. You enjoy a clearer feeling of the instruments and their interrelationship.
Filters are critical in digital audio. Commonly they introduce distortion and harshness because of "pre-ringing". Early digital recordings suffer from harshness too, due to primitive filters. After painstaking research, Meridian developed a special filter that avoids pre-ringing, so it can be steeper, cleaning up the effects of early filters. The result: a better, cleaner sound from recordings old and new.
High or low, all sounds travel at the same speed, so all the sounds from a live musical event arrive at your ear at the same time, whatever frequencies they contain. Loudspeakers, however, have a problem when playing low frequency sounds at the same time as mid and high frequencies – the bass arrives late, and the deeper the sound, the later it arrives. This delayed bass causes music to lose its impact and reduces the sense of the recorded space – it is often described as “boomy”.
The goal is to have time-accurate loudspeakers, where all reproduced frequencies start and end at the same time. In a loudspeaker, this timing is affected by the crossover, driver, and enclosure type. To eliminate the delay between low, and mid and high frequencies, Meridian has designed a combination of digital filters and time delays for the mid and high frequencies. This solution enables the mid and high frequencies to “wait” for the low frequencies, delivering perfectly-timed music playback.
Mid and high frequencies are delayed to time-align them, while upper bass is delayed with a special type of patented filter. These features must be implemented entirely in the digital domain, making them impossible to achieve in any passive or analogue-active loudspeaker design.
Enhanced Bass Alignment provides accurate time-alignment of the drivers in the system, delivering exceptional imaging and a clear, transparent, more life like sound.
WE ARE THE PIONEERS OF HI-RES AUDIO
MQA is a technology that captures the full magic of an original studio performance. Using pioneering scientific research into how people hear, MQA delivers master quality audio in a file that’s small enough to stream or download – the days of sacrificing quality for convenience are over. Visit mqa.co.uk for more information.
Uses a complex digital filter to double the rate of samples from the source to improve resolution of the finer details in the record. This means that even with a standard source such as CD using our upsampling technology we are able to significantly enhance the listening experience.
A patented Meridian audio format that combines high bandwidth, security and low jitter. MHR gets the highest possible sound quality in playback systems that use Meridian and enables the encoded transmission of PCM, MQA and DSD.
The Special Edition Loudspeakers
Meridian’s goal has always been to reproduce the sound of the original performance exactly, and let nothing else get in the way.
Meridian Speakerlink (RJ45) & S/PDIF digital input, , 32kHz–
96kHz sampling rates at up to 24 bit with MHR support (phono)AUDIO
1x RJ45 with balanced digital audio and control for 2nd loudspeaker. Carries infra-red pickup for system automation
Peak SPL: 118dB at 1m (music material)
Noise less than 15dB spl.
Overall distortion typically <0.02% at any frequency or level Frequency response In room within 3dB: 35Hz - over 32kHz
4 x 150w (600w)
2 x 200mm polypropylene long-throw
1 x 160mm
BERYLLIUM DOME TWEETER
1 x 25mm (1”) Meridian piston in short horn, beryllium dome with silver voice-coil.
2 x Freescale 56367 running at 150MHz
2 x 24-bit Multi-bit delta-sigma DACs with 128x oversampling
Crossover minimum-phase at 2.6kHz
Response correction for the whole system
User tone controls. Analogue/digital volume and phase contro
Eight-character display with system lights, can be blanked
DIMENSIONS / WEIGHT
HEIGHT; 1072mm [42.2in] (Without feet/spikes)
WIDTH: 178mm [7in] tapering to 350mm [13.8in]
DEPTH: 220mm [8.7in] tapering to 422mm [16.6in]
FOOTPRINT (W x D): 350mm [13.8in] x 422mm [16.6in]
WEIGHT: 55kg [121lbs]
20VA standby; 600VA max